Welcome to our online catalogue. If this is your first visit, we hope you will find one of the best ranges of architectural ironmongery in the UK. If you have been here before, you may notice some changes to the layout and design of the site - we hope these changes will make finding and ordering what you need even easier than before.
To view and order our products, simply browse the Products Sections menu to the left and click through to the relevant sub-category and product pages. We also have a range of supplementary information such as fitting instructions and care guides in our information pages which you can find in the menus at the top of each page.
We know that many products we sell are of a technical or unfamiliar nature, perhaps involving knowledge of operation, location or fitting. We are here to help with any questions you may have so please do not hesitate to contact us by phone or email if you need a hand.
British made vents from 1.2mm (18swg) sheet brass. Available polished and lacquered or with polished chrome electroplating.
The slots are opened and closed by sliding the button horizontally. Because the moving part is on the underside, these vents need to be fitted over a suitable free space.
As a general guide, subtract 24mm from the dimensions listed to get the ideal aperture. e.g. our 229x152mm vent would need a 205x128mm hole to move freely.
Supplied with raised countersunk fixing screws.
We can also make to measure - please call 0131 623 5577 with the size you need for an instant quote.
Supplied with fixing pins - click here for fitting instructions (pdf).